S   LUTIONS

Welcome to   S    LUTIONS, a monthly newsletter provided by Jacco & Associates. Jacco’s focus on system knowledge provides you with the engineering support and product solutions for your applications.

Question:    How much does the Wattmaster Prism Computer Front End Cost?

                   a.) $0          b.) $500          c.) $1,000     d.) $2,500

Prize:        Cleveland Browns Tailgate Toss Bean Bag Game!

Respond by September 15^th with the correct answer to be entered in the raffle for this month’s prize!

Question:  Aaon will provide you with the lowest defrost cycle time due to what design component?

Answer:    d.) Digital Scroll Compressor  Congratulations to Dave Parsons for winning a Magellan GPS!

 61 Milford Dr.  Hudson, OH  44236  Phone:(330) 463-0100  Fax:(330) 463-0101

To remove your name from our mailing list, please click here.

Questions or comments? E-mail us at opportunity@jacco.com

If you are like most Mechanical Contractors, when you hear that you are responsible for the “Building Management System” you get an uneasy feeling about that project.  Most MC’s are not Controls Contractors and you may feel that you are at the mercy of one that may not have the owner experience in mind when they install their system.  You also might be put into the situation of finger pointing when there is a problem after the project is complete.  None of this gives you the confidence to    aggressively go after that job because you may have to cover costs later that are out of your control.

 

Fortunately, Jacco & Aaon have a solution for that problem.  It is the Wattmaster Factory Installed Control System.  Aaon will have the Wattmaster factory controls designed to specifically match your unit’s options.  Then by adding key controls         components such as VAV controls, the system is ready to run from the time it is set in place. 

 

The Wattmaster “Touch Screen System Manager” is a simple to use front end that your service technicians (or even the   building owner) can set up and adjust.  The graphics and sequences are pre-loaded from Wattmaster controls so there is   minimal setup required to have a fully operable system.  There is also an option for a computer front end.  No need to contact a large corporate office to adjust schedules or change setpoints.  You can maintain the building’s control system yourself or pass along the responsibility to the building owner.  This way you keep your customer and keep your customer happy.

 

When you are looking at a replacement or design/build job, this can be the difference in getting the job or losing it.  Whatever type of project you are looking at, Jacco & Aaon have a control system that is right for the job.  And you.

 

Contact Your Jacco Salesperson For More information.

Wattmaster Controllers:

· Constant Volume

· Single Zone VAV

· Variable Volume

· Make Up Air

· Water Source Heat Pumps

· Single Duct VAV Boxes

· Fan Powered VAV Boxes

· Boilers

· Exhaust Fans

· Unit Heaters

· Pumps